China Sales Eaton Original Hydraulic Motor Bm Hydraulic Cycloid Planetary Gear Motor Manufacturers motor efficiency

Product Description

Merchandise Overview
Introduction of hydraulic motor

The hydraulic motor is an executive element of the hydraulic system, which converts the liquid pressure power presented by thehydraulic pump into the mechanical strength (torque and velocity) of its output shaft. Liquid is the medium of transmitting drive andmotion.

Radial piston hydraulic motor
    The operating theory of the radial piston sort hydraulic motor is that when the force oil enters the base of the piston in the cylinder entire body via the window of the set oil distribution shaft 4, the piston extends outwards and firmly presses against the internal wall of the stator, simply because there is an eccentric length amongst the stator and the cylinder block.
    At the get in touch with stage in between the plunger and the stator, the response power among the stator and the plunger is. The drive can be decomposed into 2 parts.
    When the oil force acting on the base of the plunger is p, the diameter of the plunger is D, and the angle amongst the pressure and is x, the pressure generates a torque on the cylinder block and can make the cylinder block rotate. The cylinder block then outputs the torque and pace through the transmission shaft connected with the conclude experience.

 

 

technical parameter

technical parameter

 

Displacement(ml/r)

 

245

 

310

 

390

 

490

 

625

 

800

 

Movement(LPM)

 

Ongoing

 

eighty

 

80

 

eighty

 

eighty

 

eighty

 

eighty

 

Intermittent

 

one hundred

 

a hundred

 

100

 

a hundred

 

one hundred

 

one hundred

 

Velocity(RPM)

 

Constant

 

320

 

250

 

200

 

200

 

160

 

a hundred and twenty

 

Intermittent

 

350

 

280

 

230

 

200

 

160

 

a hundred and twenty

 

Pressure(Mps)

 

Continuous

 

fourteen

 

fourteen

 

14

 

fourteen

 

12.five

 

10

 

Intermittent

 

15

 

fifteen

 

fifteen

 

15

 

13

 

twelve

 

Torque(N*m)

 

Constant

 

400

 

five hundred

 

550

 

680

 

780

 

800

 

Intermittent

 

420

 

520

 

580

 

seven-hundred

 

800

 

820

 

 

 

Relevant models

 

Company profile

 

 

1.One particular set/Plastic box/Cardboard CTN
two.Security for lengthy-distance transportation
3.All of the productions will be checked meticulously ahead of shipping
Pre-product sales Service
one. Inquiry and consulting help
2. Sample tests support
3. Recommend the most suited equipment according to customer’s purpose
four. Factory going to welcomed
After-product sales Services
one. Instruction how to set up the device
2. Education how to use the device
three. Warranty 1 calendar year
four. Engineers available to support equipment oversea

FAQ
Q1.Are you a factory or a investing organization?What can you give?
We are a manufacturing unit locates in industrial belt of HangZhou City,our principal goods are hydraulic orbit motors,hydraulic winches,hydraulic
metal gap punchers,mini excavators,and many others.

Q2.I want to purchase your item,how can I pay?
We assist T/T,Paypal,Western Union,also you can shell out by credit history card.

Q3.How about the guarantee?
We promise to provide large quality goods and expert soon after-income provider.We can source technical assistance as lengthy as youneed,outside of that,we also provide 6 months of guarantee.

This autumn.If we don’t uncover what we want on your site,what ought to we do?
You can begin a dialogue to us,or send out us e-mail about the descriptions and images of the items you need,we will check ifwe can provide and reply your inquiry ASAP. 

Q5.Could we buy 1pcs of the merchandise for top quality testing?
Indeed of program,we understand top quality test is essential and we are happy to deliver 1 set for quality testing.

 

Certification: ISO9001
Excitation Mode: Excited
Power Rating: 1500W
Casing Protection: Protection Type
Number of Poles: 6
Speed: Low Speed

###

Samples:
US$ 140/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

technical parameter
 
Displacement(ml/r)
 
245
 
310
 
390
 
490
 
625
 
800
 
Flow(LPM)
 
Continuous
 
80
 
80
 
80
 
80
 
80
 
80
 
Intermittent
 
100
 
100
 
100
 
100
 
100
 
100
 
Speed(RPM)
 
Continuous
 
320
 
250
 
200
 
200
 
160
 
120
 
Intermittent
 
350
 
280
 
230
 
200
 
160
 
120
 
Pressure(Mps)
 
Continuous
 
14
 
14
 
14
 
14
 
12.5
 
10
 
Intermittent
 
15
 
15
 
15
 
15
 
13
 
12
 
Torque(N*m)
 
Continuous
 
400
 
500
 
550
 
680
 
780
 
800
 
Intermittent
 
420
 
520
 
580
 
700
 
800
 
820
 

###

Certification: ISO9001
Excitation Mode: Excited
Power Rating: 1500W
Casing Protection: Protection Type
Number of Poles: 6
Speed: Low Speed

###

Samples:
US$ 140/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

technical parameter
 
Displacement(ml/r)
 
245
 
310
 
390
 
490
 
625
 
800
 
Flow(LPM)
 
Continuous
 
80
 
80
 
80
 
80
 
80
 
80
 
Intermittent
 
100
 
100
 
100
 
100
 
100
 
100
 
Speed(RPM)
 
Continuous
 
320
 
250
 
200
 
200
 
160
 
120
 
Intermittent
 
350
 
280
 
230
 
200
 
160
 
120
 
Pressure(Mps)
 
Continuous
 
14
 
14
 
14
 
14
 
12.5
 
10
 
Intermittent
 
15
 
15
 
15
 
15
 
13
 
12
 
Torque(N*m)
 
Continuous
 
400
 
500
 
550
 
680
 
780
 
800
 
Intermittent
 
420
 
520
 
580
 
700
 
800
 
820
 

###

The Benefits of Using a Gear Motor

A gear motor works on the principle of conservation of angular momentum. As the smaller gear covers more RPM and the larger gear produces more torque, the ratio between the two is greater than one. Similarly, a multiple gear motor follows the principle of energy conservation, with the direction of rotation always opposite to the one that is adjacent to it. It’s easy to understand the concept behind gear motors and the various types available. Read on to learn about the different types of gears and their applications.

Electric motor

The choice of an electric motor for gear motor is largely dependent on the application. There are various motor and gearhead combinations available, and some are more efficient than others. However, it is critical to understand the application requirements and select a motor that meets these needs. In this article, we’ll examine some of the benefits of using a gear motor. The pros and cons of each type are briefly discussed. You can buy new gear motors at competitive prices, but they aren’t the most reliable or durable option for your application.
To determine which motor is best for your application, you’ll need to consider the load and speed requirements. A gear motor’s efficiency (e) can be calculated by taking the input and output values and calculating their relation. On the graph below, the input (T) and output (P) values are represented as dashed lines. The input (I) value is represented as the torque applied to the motor shaft. The output (P) is the amount of mechanical energy converted. A DC gear motor is 70% efficient at 3.75 lb-in / 2,100 rpm.
In addition to the worm gear motor, you can also choose a compact DC worm gear motor with a variable gear ratio from 7.5 to 80. It has a range of options and can be custom-made for your specific application. The 3-phase AC gear motor, on the other hand, works at a rated power of one hp and torque of 1.143.2 kg-m. The output voltage is typically 220V.
Another important factor is the output shaft orientation. There are two main orientations for gearmotors: in-line and offset. In-line output shafts are most ideal for applications with high torque and short reduction ratios. If you want to avoid backlash, choose a right angle output shaft. An offset shaft can cause the output shaft to become excessively hot. If the output shaft is angled at a certain angle, it may be too large or too small.
Motor

Gear reducer

A gear reducer is a special kind of speed reducing motor, usually used in large machinery, such as compressors. These reducers have no cooling fan and are not designed to handle heavy loads. Different purposes require different service factors. For instance, a machine that requires frequent fast accelerations and occasional load spikes needs a gear reducer with a high service factor. A gear reducer that’s designed for long production shifts should be larger than a machine that uses it for short periods of time.
A gear reducer can reduce the speed of a motor by a factor of two. The reduction ratio changes the rotation speed of the receiving member. This change in speed is often required to solve problems of inertia mismatch. The torque density of a gear reducer is measured in newton meters and will depend on the motor used. The first criterion is the configuration of the input and output shafts. A gear ratio of 2:1, for example, means that the output speed has been cut in half.
Bevel gear reducers are a good option if the input and output shafts are perpendicular. This type is very robust and is perfect for situations where the angle between two axes is small. However, bevel gear reducers are expensive and require constant maintenance. They are usually used in heavy-duty conveyors and farm equipment. The correct choice of gear reducer for gear motor is crucial for the efficiency and reliability of the mechanism. To get the best gear reducer for your application, talk to a qualified manufacturer today.
Choosing a gear reducer for a gear motor can be tricky. The wrong one can ruin an entire machine, so it’s important to know the specifics. You must know the torque and speed requirements and choose a motor with the appropriate ratio. A gear reducer should also be compatible with the motor it’s intended for. In some cases, a smaller motor with a gear reducer will work better than a larger one.
Motor

Motor shaft

Proper alignment of the motor shaft can greatly improve the performance and life span of rotating devices. The proper alignment of motors and driven instruments enhances the transfer of energy from the motor to the instrument. Incorrect alignment leads to additional noise and vibration. It may also lead to premature failure of couplings and bearings. Misalignment also results in increased shaft and coupling temperatures. Hence, proper alignment is critical to improve the efficiency of the driven instrument.
When choosing the correct type of gear train for your motor, you need to consider its energy efficiency and the torque it can handle. A helical geared motor is more efficient for high output torque applications. Depending on the required speed and torque, you can choose between an in-line and a parallel helical geared motor. Both types of gears have their advantages and disadvantages. Spur gears are widespread. They are toothed and run parallel to the motor shaft.
A planetary gear motor can also have a linear output shaft. A stepping motor should not operate at too high current to prevent demagnetization, which will lead to step loss or torque drop. Ensure that the motor and gearbox output shafts are protected from external impacts. If the motor and gearbox are not protected against bumps, they may cause thread defects. Make sure that the motor shafts and rotors are protected from external impacts.
When choosing a metal for your gear motor’s motor shaft, you should consider the cost of hot-rolled bar stock. Its outer layers are more difficult to machine. This type of material contains residual stresses and other problems that make it difficult to machine. For these applications, you should choose a high-strength steel with hard outer layers. This type of steel is cheaper, but it also has size considerations. It’s best to test each material first to determine which one suits your needs.
In addition to reducing the speed of your device, a geared motor also minimizes the torque generated by your machine. It can be used with both AC and DC power. A high-quality gear motor is vital for stirring mechanisms and conveyor belts. However, you should choose a geared motor that uses high-grade gears and provides maximum efficiency. There are many types of planetary gear motors and gears on the market, and it’s important to choose the right one.
Motor

First stage gears

The first stage gears of a gear motor are the most important components of the entire device. The motor’s power transmission is 90% efficient, but there are many factors that can affect its performance. The gear ratios used should be high enough to handle the load, but not too high that they are limiting the motor’s speed. A gear motor should also have a healthy safety factor, and the lubricant must be sufficient to overcome any of these factors.
The transmission torque of the gear changes with its speed. The transmission torque at the input side of the gear decreases, transferring a small torque to the output side. The number of teeth and the pitch circle diameters can be used to calculate the torque. The first stage gears of gear motors can be categorized as spur gears, helical gears, or worm gears. These three types of gears have different torque capacities.
The first stage helical gear is the most important part of a gear motor. Its function is to transfer rotation from one gear to the other. Its output is the gearhead. The second stage gears are connected by a carrier. They work in tandem with the first stage gear to provide the output of the gearhead. Moreover, the first stage carrier rotates in the same direction as the input pinion.
Another important component is the output torque of the gearmotor. When choosing a gearmotor, consider the starting torque, running torque, output speed, overhung and shock loads, duty cycles, and more. It is crucial to choose a gearmotor with the right ratio for the application. By choosing the proper gearmotor, you will get maximum performance with minimal operating costs and increase plant productivity. For more information on first stage gears, check out our blog.
The first stage of a gear motor is composed of a set of fixed and rotating sprockets. The first stage of these gears acts as a drive gear. Its rotational mass is a limiting factor for torque. The second stage consists of a rotating shaft. This shaft rotates in the direction of the torque axis. It is also the limiting force for the motor’s torque.

China Sales Eaton Original Hydraulic Motor Bm Hydraulic Cycloid Planetary Gear Motor Manufacturers     motor efficiencyChina Sales Eaton Original Hydraulic Motor Bm Hydraulic Cycloid Planetary Gear Motor Manufacturers     motor efficiency
editor by czh 2023-01-25